K.D. Feddersen: Four Strategies to Combat Cost Pressure More Than Just Materials Logistics

The interview was conducted by Matthias Gutbrod | Translated by AI 6 min Reading Time

Related Vendor

Punitive tariffs, expensive high-performance polymers, and limited development capacity are putting pressure on processors. At Fakuma, Managing Director Dr. Wilfried Jobst explains in an interview with PlastXnow how K.D. Feddersen Distribution is countering these challenges with new partners from China and India, as well as its own development center in Cologne.

Bringing new material partnerships and digital services to the table: Dr. Wilfried Jobst (center), Managing Director at K.D. Feddersen Distribution, with his sales team at the Feddersen Group’s Fakuma booth.(Bild:  K.D. Feddersen)
Bringing new material partnerships and digital services to the table: Dr. Wilfried Jobst (center), Managing Director at K.D. Feddersen Distribution, with his sales team at the Feddersen Group’s Fakuma booth.
(Bild: K.D. Feddersen)

Dr. Jobst, many plastics processors are currently grappling with high energy and material costs, volatile supply chains, and downsized in-house R&D departments all at once. Is the traditional distribution business still sufficient today?

Dr. Wilfried Jobst: No, simply storing and shipping granules is no longer enough. Our customers are under significant cost pressure and, at the same time, must meet higher standards for performance and sustainability. Many processors simply no longer have the personnel capacity to thoroughly test every new material option themselves down to the last detail. That’s why we at K.D. Feddersen Distribution are evolving even further from a pure material supplier into a technical solutions partner. Specifically, we are currently focusing on four pillars: establishing our own development center in Cologne, forming new strategic supplier partnerships—such as with ZYPEEK from China and Styrenix from India—even closer integration with our engineering sister company M.TEC, and a new digital customer portal.

Let's start by focusing on the Cologne location. Specifically, what services does the new technical development center provide for your customers?

Jobst: In Cologne, we provide hands-on support to our customers, from raw material selection to production tooling. We actively support processors in application development, conduct material and component testing, develop compound formulations as needed based on our customers’ requirements, and assist with the associated production of prototypes. Especially when a customer needs to substitute a material under time pressure or qualify a new application, we take a large part of the preliminary work off their hands.

With M.TEC Engineering GmbH, the Feddersen Group already includes a proven development service provider. How do the Cologne Development Center and M.TEC differ from one another—and where do their roles overlap?

Jobst: This complements each other perfectly because we cover different phases and levels of detail. In Cologne, the focus is on material-specific application development, practical testing, and the prototyping phase in the direct distribution business. For large customer projects with highly complex systems, however, we collaborate even more closely with M.TEC than before. Our colleagues in Herzogenrath contribute in-depth methodological expertise, simulations, concepts for design for recycling, and their impressive AI-powered optimization tool, M.OPT. For the customer, this results in an end-to-end process—from the initial computer-aided component design through prototyping to ongoing series production. This reduces development risk and significantly shortens the path to series production approval. 

On the product side, your entry into the PEEK market is attracting a lot of attention. With Jilin Joinature Polymer, you’re bringing the ZYPEEK brand from China to Europe. The European PEEK market is considered technologically sophisticated, but also very high-priced. What strategy are you using to compete there?

Jobst: Jilin Joinature, based in Changchun, is an impressive, dynamic company that is entering the European market with the goal of establishing itself as a key new player through exceptional quality and attractive prices. The manufacturer is a market leader in China, has its own research and development department, and boasts an annual production capacity of approximately 2,400 metric tons of PEEK, which is currently being expanded. For many European processors, high-performance plastics such as polyetheretherketone (PEEK) have often been only a last resort for cost reasons—when metals or other polymers reached their technical limits. As a strategic sales partner in Europe, we are opening up precisely this segment with ZYPEEK. We offer unreinforced and reinforced grades for the automotive, aerospace, and electrical and electronics industries, as well as specialty grades for medical technology—at significantly more attractive terms, but coupled with our European logistics and on-site technical support. 

European buyers and quality managers scrutinize high-performance polymers from China very closely, particularly with regard to batch consistency, specifications, and delivery reliability. How do you address this skepticism?

Jobst: These are entirely legitimate questions, and this is precisely where our role as a European distributor comes into play. A fabricator does not purchase directly from the Far East anonymously through us, but rather through an established partner with its own subsidiaries and inventory in Europe. In addition, we have a very thorough understanding of the Asian market thanks to our own on-site presence over many years, and we audit our partners accordingly. Added to this is our own application expertise—further strengthened by our Development Center in Cologne—which we use to verify material properties and support customers during processing. In addition, Jilin Joinature has established its own competent team in Europe, with whom we work closely.

You are also realigning your portfolio in the amorphous plastics sector and collaborating with Styrenix from India. What role do the recent EU anti-dumping duties on Asian styrene-based plastics play in this?

Jobst: A very significant one. Since the European Commission imposed anti-dumping duties on ABS imports from South Korea and Taiwan, many processors in established supply chains have faced significant additional costs. With Styrenix Performance Materials, we are introducing a high-performance alternative from India and Thailand. Styrenix—which emerged from the former Indian operations of Bayer Material Science and later Ineos Styrolution, whose former production facilities in India and Thailand were acquired—brings decades of experience in styrene polymers to the table. In particular, we are adding the Asalac brand for weather-resistant ASA and the Styroloy brand for PC+ABS, ASA+PMMA, and PA+ABS blends to our product portfolio. This enables us to serve key applications in automotive interiors and exteriors, as well as in the home appliance and electronics industries, on competitive terms.

In addition to new materials and testing labs, you are currently setting up a new customer portal. What can this platform do that a traditional product finder on the website cannot?

Jobst: Our goal was to eliminate typical friction points in day-to-day business. The purpose of the new customer portal is to provide our customers who are registered on the portal with round-the-clock, centralized access to all relevant data regarding our portfolio—such as technical data sheets or specifications for individual materials—as well as their order and purchase documents. If a customer needs to quickly compare technical data in the evening or the purchasing department needs a document, no one has to wait for an email response anymore. This frees up time on both sides for the truly complex technical discussions that we, of course, would like to continue having with our business partners. It’s important to note that the portal is not intended to replace close personal contact with our customers, but rather to complement it. The customer decides how they would like to stay in touch with us and receive information.

Looking ahead to the next twelve months, where do you see the greatest potential for K.D. Feddersen Distribution in the European market right now?

Jobst: It lies in the combination of economically attractive material alternatives and genuine technical relief for our customers. Today, fabricators are no longer looking for catalogs, but rather for reliable solutions to cost pressures, customs risks, and limited development resources. When we open up new possibilities for them in procurement with ZYPEEK, Styrenix, and other products, while simultaneously providing them with technical support in Cologne and in collaboration with M.TEC, we create exactly the kind of added value that sustains long-term partnerships.

The person you're talking to

(Source: K.D. Feddersen)

Dr. Wilfried Jobst is the managing director of K.D. Feddersen GmbH & Co. KG in Hamburg and is responsible for the group’s plastics distribution business. Previously, he headed the group’s Asian operations in China for many years, including K.D.F. Distribution (Shanghai) Co., Ltd. and AKRO Engineering Plastics (Changzhou) Co., Ltd., and drove the international expansion of the business.

Subscribe to the newsletter now

Don't Miss out on Our Best Content

By clicking on „Subscribe to Newsletter“ I agree to the processing and use of my data according to the consent form (please expand for details) and accept the Terms of Use. For more information, please see our Privacy Policy. The consent declaration relates, among other things, to the sending of editorial newsletters by email and to data matching for marketing purposes with selected advertising partners (e.g., LinkedIn, Google, Meta).

Unfold for details of your consent