Mocom at Fakuma Focus on Specialty Vehicles and Lightweight Construction

From Matthias Gutbrod | Translated by AI 4 min Reading Time

Related Vendor

At Fakuma, PlastXnow met with Mocom’s new CEO, Dirk Sadowski. After Mocom closed its recycling plant in Gardelegen, the compounder is now focusing its portfolio more sharply on specialty products and global markets. At Fakuma, the company set the standard for lightweight construction and sustainable material concepts with its new carbon compounds.

At Fakuma, Mocom’s new CEO, Dirk Sadowski, is presenting a center console for an electric Porsche. The console is injection-molded as a single piece from a polyamide compound containing recycled carbon fibers (rCF-PA). Thanks to the compound’s high specific stiffness and strength, the highly complex console does not require a metal support structure.(Bild:  PlastXnow / Matthias Gutbrod)
At Fakuma, Mocom’s new CEO, Dirk Sadowski, is presenting a center console for an electric Porsche. The console is injection-molded as a single piece from a polyamide compound containing recycled carbon fibers (rCF-PA). Thanks to the compound’s high specific stiffness and strength, the highly complex console does not require a metal support structure.
(Bild: PlastXnow / Matthias Gutbrod)

Dirk Sadowski has served as the new CEO of the Hamburg-based compound manufacturer Mocom since September 2026. The leadership change comes during a period of strategic reorientation: For economic reasons, Mocom suspended production at its Gardelegen recycling facility. However, despite this plant closure, Mocom continues to offer a consolidated eco-portfolio, which is now being further expanded in a targeted manner. 

“We’re hearing the question, ‘Can you make this in an eco-friendly version too?’ more and more often from our customers in light of future regulations,” Sadowski explained to PlastXnow. “We are therefore continuing to expand our Eco portfolio using purchased recycled materials as well as bio-based and mass-balanced raw materials.” To this end, Mocom is leveraging its existing expertise in the field of verifiably sustainable compounds. 

Focus on Specialty Products and Global Presence

In addition to consolidation in the area of sustainable materials, customized specialty products are becoming a greater focus of the company’s strategy. Mocom aims to maintain high quality standards in production and service and to tailor material solutions closely to the specific requirements of processors. “We see ourselves as development partners to our customers and combine our product expertise with a deep understanding of their specific requirements,” Sadowski emphasized. “In doing so, we support our customers from material selection through to implementation.” 

At the same time, Sadowski aims to further strengthen the company’s global footprint. Following the closure of the Gardelegen recycling plant, he is focusing on strengthening the operational capabilities of the company’s global locations in Europe, the Americas, and the Asia-Pacific region and aligning them with the specialty portfolio. “Our global presence enables us to work closely with our local customers while ensuring a worldwide supply,” Sadowski explained. “In doing so, it is essential to comply with the complex regulatory requirements of our target markets and to mitigate the impact of global tariffs and geopolitical uncertainties.”

New Carbon Compounds for Lightweight Construction and the Automotive Industry

At Fakuma, Mocom presented specific new materials, including two new compounds from the Wic, which are based on recycled carbon fibers. The materials offer high specific strength at low density and combine mechanical performance with a significantly reduced CO2 footprint.  “Lightweight construction and light guidance, particularly in automotive engineering, remain key drivers in plastics processing,” said the Mocom CEO. “Strict requirements, especially for electric vehicles, demand continuous weight reduction.” As a current application example, Sadowski presented a one-piece injection-molded center console that requires no metal support structure whatsoever. “The potential of lightweight construction using carbon compounds has not yet been fully realized in many areas,” Sadowski emphasized.

Dirk Sadowski Named New CEO of Mocom

Dirk Sadowski has been at the helm of the management team at Hamburg-based plastics compounder Mocom since September 1, 2026. The former co-managing director and CFO succeeds Jens Kaatze, who left the company by mutual agreement.

With this personnel decision, the Otto Krahn ownership group is focusing on continuity and a stronger emphasis on operational excellence and transformation. Sadowski brings extensive industry and consulting experience to the role, including from his previous position at Horváth & Partners.

New Products from Mocom at Fakuma 2026

At Fakuma, the Hamburg-based compound manufacturer Mocom presented new materials for lightweight construction, lighting applications, and those made from recycled content. The technical focus is on two new polyamide compounds from the Wic product group, each reinforced with 30% recycled carbon fibers (rCF) and combining low density with high specific strength:

  • Wic PA 12 30 (rCF-reinforced polyamide 12): This compound combines low part weight with high impact strength—even at low temperatures. Due to its very low moisture absorption, mechanical properties and dimensional stability remain consistent even under varying climatic conditions. Compared to primary carbon fibers, the material reduces the global warming potential (GWP) by up to 65%. Typical applications include sports and leisure components subjected to high mechanical stress, such as ski bindings, battery housings for e-bikes, saddle shells, and clipless pedals.

  • Wic PARA 30 (rCF-reinforced semi-aromatic polyamide): This material combines high stiffness and strength with a high-quality surface finish. Thanks to its low water absorption, its mechanical properties are retained almost entirely even when conditioned. In addition, Mocom is expanding the Wic-PARA portfolio to include electrically conductive grades. The material is intended for load-bearing, visible components such as display mounts.

  • Complementary Portfolio (Altech PARA GF & Lighting Applications): For components that require high mechanical performance without electrical conductivity, as well as custom coloring, glass-fiber-reinforced compounds from the Altech PARA GF series are also available. The trade show lineup was rounded out by material solutions for lighting applications and other recycled-content compounds.

Subscribe to the newsletter now

Don't Miss out on Our Best Content

By clicking on „Subscribe to Newsletter“ I agree to the processing and use of my data according to the consent form (please expand for details) and accept the Terms of Use. For more information, please see our Privacy Policy. The consent declaration relates, among other things, to the sending of editorial newsletters by email and to data matching for marketing purposes with selected advertising partners (e.g., LinkedIn, Google, Meta).

Unfold for details of your consent